MG MG Farina Magnette - MG and A60 wheels
|
|
| hi, Does any one know if the bolt on wheels from an MG(BGT) will fit the A60 Farina hub (specifically a Riley 4/72) ?? cheers Andrew |
| A D Foster15/05/2009 at 02:51 |
Yes but you need to fit spacers and longer studs on the front due to the face of the drum not being flat. The wheels nuts are also a little to small, some peolpe sy you can use triumph 2000 ones. Spacer kits are avable from Deamon tweeks or you can use westminster rear studs and make yiur own spacers. Tr6 wheels fit straight on
|
| s lee15/05/2009 at 14:52 |
| thank you. i had come across some bolt on wire wheels from an MGBGT and am considering fitting them to a Riley 4/72. The bolt on wire wheels have "made in india under licence from dunlop, WIL 89 02 5 1/2 J X 14 FH X W 7 16 B103" stamped on the inside. they measure 114mm between opposing hole centres (which is the same as the Riley 4/72) - but just need to make sure as they are costly to freight from one end of the country to the other.... cheers |
| A D Foster19/05/2009 at 02:33 |
MG MG Farina Magnette index
